저널

Electrochemical properties of porous AuCu dendrite surface for the oxygen reduction reaction in alkaline solutions
알칼리 수용액에서 산소환원반응에 대한 다공성 AuCu 덴드라이트 표면의 전기화학적 특성 평가

김민영;이종원;조수연;박다정;정현민;이주열;이규환;
[Kim, Min-Yeong;Lee, Jong Won;Cho, Soo Yeon;Park, Da Jung;Jung, Hyun Min;Lee, Joo Yul;Lee, Kyu Hwan;]

한국재료연구원 표면기술본부 전기화학연구실;
Department of Electrochemistry, Surface Technology Division, Korea Institute of Materials Science(KIMS);

한국표면공학회지, Vol. 54, No. 1, pp. 1-11.

DOI : 10.5695/JKISE.2021.54.1.1

Effect of concentration of H₂SO₄ on electrochemical properties of equipped Al sacrificial anode to prevent the corrosion and discolor of silver surface
은의 표면 부식 및 변색을 방지하기 위해 설치된 Al 희생양극의 전기화학적 특성에 미치는 황산 농도의 영향

신병현;정원섭;
[Shin, Byung-Hyun;Chung, Won-Sub;]

부산대학교, 재료공학과, 소재기술연구소;부산대학교, 재료공학부;
The Institute of Materials Technology, Departments of Materials Science and Engineering, Pusan National University;Departments of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 54, No. 1, pp. 12-17.

DOI : 10.5695/JKISE.2021.54.1.12

Manufacture and Surface Structure Characteristics of Mn-Doped (K, Na)NbO₃ Films

[Kim, Yeon Jung;Byun, Jaeduk;Hyun, June Won;]

College of Engineering, Dankook University;Department of Physics, Dankook University;

한국표면공학회지, Vol. 54, No. 1, pp. 18-24.

DOI : 10.5695/JKISE.2021.54.1.18

Study on the narrowed nanopores of anodized aluminum oxide template by thin-film deposition using e-beam evaporation
전자빔 증발법 박막 증착을 이용한 양극 산화 알루미늄 템플릿의 나노 포어 가공 연구

이승훈;이민영;김천중;김관오;윤재성;유영은;김정환;
[Lee, Seung-Hun;Lee, Minyoung;Kim, Chunjoong;Kim, Kwanoh;Yoon, Jae Sung;Yoo, Yeong-Eun;Kim, Jeong Hwan;]

한국기계연구원 나노공정장비연구실;충남대학교 신소재공학과;한밭대학교 신소재공학과;
Department of Nano Manufacturing Technology, Korea Institute of Machinery and Materials;Department of Materials Science and Engineering, Chungnam National University;Department of Advanced Materials Engineering, Hanbat National University;

한국표면공학회지, Vol. 54, No. 1, pp. 25-29.

DOI : 10.5695/JKISE.2021.54.1.25

Properties of double-layered anodizing films on Al alloys formed by two consecutive anodizings
알루미늄 합금의 연속식 양극산화법으로 형성시킨 이중 산화막층의 특성

정나겸;최진섭;
[Jeong, Nagyeom;Choi, Jinsub;]

영광YKMC 기술연구소;인하대학교 금속재료공정공학전공;
R&D center, YKMC Inc.;Program in Metals and Materials Process Engineering, Inha University;

한국표면공학회지, Vol. 54, No. 1, pp. 30-36.

DOI : 10.5695/JKISE.2021.54.1.30

Effect of Hexa-methylenetetramine (HMT) on Nucleation and Growth Behaviors of Ni(OH)₂ Nanosheets Produced by Electrodeposition
전착법으로 제작한 Ni(OH)₂ 나노 시트의 핵 형성과 성장 거동에 미치는 헥사-메틸렌테트라민(HMT)의 영향

김동연;손인준;최문현;
[Kim, Dong Yeon;Son, Injoon;Choi, Mun-Hyun;]

경북대학교 금속신소재공학전공;동강테크;
Department of Materials Science and Metallurgical Engineering, Kyungpook National University;Dongkang Tech Corp.;

한국표면공학회지, Vol. 54, No. 1, pp. 37-42.

DOI : 10.5695/JKISE.2021.54.1.37

Study of High Temperature of Inconel 740 Alloy in Air and Ar-0.2%SO2 Gas
대기 및 Ar-0.2%SO2가스에서 Inconel 740 합금의 고온부식 연구

이동복1,김민정2
[Dong Bok Lee1, Min Jung Kim2]

1성균관대학교 신소재공학과, 2한국폴리텍대학 신소재응용과
1School of Advanced Materials Science and Engineering, Sungkyunkwan University, Suwon 16419, Korea, 2Advanced material application department, Korea Polytechnic College, 478 Munemiro, Bupyeong-gu, Incheo 21417, Korea

한국표면공학회지, Vol. 54, No. 2, pp. 43-52.

DOI : 10.5695/JKISE.2021.54.2.43

Optimization of tetrahedral amorphous carbon (ta-C) film deposited with filtered cathodic vacuum arc through Taguchi robust design
다구찌 강건 설계를 통한 자장 여과 아크 소스로 증착된 사면체 비정질 탄소막의 최적화

곽승윤 a,b , 장영준 b , 류호준 a,b , 김지수 c,d , 김종국 b*
[Seung-Yun Kwak a,b , Young-Jun Jang b , Hojun Ryu a,b , Jisoo Kimc,d , and Jongkuk Kimb*]

a부산대학교 기계공학부, b한국재료연구원 표면재료연구본부 극한환경코팅 연구실, c경북대학교 정밀기계 공학과, d경북대학교 미래과학기술융합학과
aDepartment of mechanical engineering, Pusan National University (PNU), Busan 46241, Korea b Extreme Environmental Coating Department, Korea Institute of Materials Science (KIMS), Changwon, 51508, Korea dDepartment of Advanced Science and Technology Convergence, Kyungpook National University (KNU), Sangju, 37224, Korea

한국표면공학회지, Vol. 54, No. 2, pp. 53-61.

DOI : 10.5695/JKISE.2021.54.2.53

Microstructural Analysis on Oxide Film of Al2024 Exposed to Atmospheric Conditions
대기 노출된 Al2024 알루미늄 합금 산화막에 대한 미세조직 분석

권대엽, 최원준, 반치범
[Daeyeop Kwon, Wonjun Choi, Chi Bum Bahn]

부산대학교 기계공학부
School of Mechanical Engineering, Pusan National University, Busan 46241, Republic of Korea

한국표면공학회지, Vol. 54, No. 2, pp. 62-70.

DOI : 10.5695/JKISE.2021.54.2.62

Effect of Neodymium concentration on electrochemical properties of 925 silver
Ag925의 전기화학적 특성에 미치는 네오디뮴 함량의 영향

신병현 a , 정승진 b , 정원섭 b*
[Byung-Hyun Shin a , Seungjin Jung b , and Wonsub Chung b*]

a부산대학교, 재료공학과, 소재기술연구소 b부산대학교, 재료공학부
a The Institute of Materials Technology, Departments of Materials Science and Engineering, Pusan National University, Busan 609-735, Republic of Korea bSchool of Materials Science and Engineering, Pusan National University, Busan 609-735, Republic of Korea

한국표면공학회지, Vol. 54, No. 2, pp. 71-76.

DOI : 10.5695/JKISE.2021.54.2.71

Investigation on the polystyrene surface coating method of graphene oxide
산화그래핀(GO)의 플라스틱(PS) 표면 코팅방법에 대한 연구

박재범a , 이지훈a , 허증수a , 박단비b , 임정옥b*
[Jaebum Parka , Jihoon Leea , Jeung Soo Huha , Danbi Parkb , Jeong Ok Limb*]

a경북대학교 융복합시스템공학과, b경북대학교 생명의학연구소
aSchool of Convergence & Fusion System Engineering, Kyungpook National University, Sangju-si, 37224, Republic of Korea. bBiomedical Research Institute, Joint Institute for Regenerative Medicine, Kyungpook National University, School of Medicine, Kyungpook National University Hospital, Daegu, 41940, Republic of Korea

한국표면공학회지, Vol. 54, No. 2, pp. 77-83.

DOI : 10.5695/JKISE.2021.54.2.77

Enhancement of Condensation Heat Transfer of Anodized Aluminum by Teflon Coating and Oil-Impregnation
테플론 코팅과 오일 담지를 이용한 알루미늄 양극산화피막의 응축 열전달 향상

강민주 1 , 이종훈 1 , 차수진 1 , 신예지 1 , 김동현 2 , 김경자 2 , 이정훈 1*
[Minjoo Kang 1 , Jonghoon Lee 1 , Soojin Cha 1 , Yeaji Shin 1 , Donghyun Kim 2 , Kyung-Ja Kim 2 , Junghoon Lee 1*]

1부경대학교 금속공학과 2한국세라믹기술원기업지원본부
1Department of Metallurgical Engineering, Pukyong National University, Busan 48547, Republic of Korea 2Business Support Division, Korea Institute of Ceramic Engineering and Technology, 101, Soho-ro, Jinju-si, Gyeongsangnam-do 52851, Republic of Korea

한국표면공학회지, Vol. 54, No. 2, pp. 90-95.

DOI : 10.5695/JKISE.2021.54.2.90

Effect of Annealing Temperature on the Properties of NaNbO3:Eu 3+ Phosphor Thin Films Deposited on Quartz Substrates
석영 기판 위에 증착된 NaNbO3:Eu 3+ 형광체 박막의 특성에 열처리 온도가 미치는 영향

조신호 *
[Shinho Cho*]

신라대학교 신소재공학과
Department of Materials Science and Engineering, Silla University, Busan 46958, Korea

한국표면공학회지, Vol. 54, No. 2, pp. 96-101.

DOI : 10.5695/JKISE.2021.54.2.96

Detection of corrosion on steel plate by using Image Segmentation Method
영상분할법을 이용한 강판상의 부식 감지

김범수a, 김연원b, 양정현a*
[Beomsoo Kima, Yeonwon Kimb, Jeonghyeon Yanga*]

a경상국립대학교 기계시스템공학부, b목포해양대학교 메카트로닉스공학과
aDepartment of Mechanical System Engineering, Gyeongsang National University, Tongyeong, Gyeongnam, 53064, Korea bDivision of Marine Mechatronics, Mokpo National Maritime University, Mokpo, 58628, Korea

한국표면공학회지, Vol. 54, No. 2, pp. 84-89.

DOI : 10.5695/JKISE.2021.54.2.84

Corrosion Behaviors of Laser-welded Super Duplex Stainless Steel(UNS S32506) Tube with Post-Weld Heat Treatment Conditions
슈퍼 듀플렉스 스테인리스강(UNS S32506) 레이저 조관용접 튜브의 용접 후 열처리에 따른 부식거동

조동민1 · 박진성1 · 홍승갑2 · 황중기3 · 김성진1,*
[Dong Min Cho1, Jin-seong Park1, Seung Gab Hong2, Joong-Ki Hwang3, and Sung Jin Kim1,*]

1순천대학교 신소재공학과, 2포스코 기술연구원, 3동명대학교 기계공학부
1Department of Advanced Materials Engineering, Sunchon National University, Jungang-ro, Suncheon 57922, Republic of Korea 2POSCO Technical Research Laboratories, Donghaean-ro, Pohang 37859, Republic of Korea 3School of Mechanical Engineering, Tongmyong University, Busan 48520, Republic of Korea

한국표면공학회지, Vol. 54, No. 3, pp. 102-111.

DOI : 10.5695/JKISE.2021.54.3.102

Luminescent Properties and Energy Transfer Efficiency of BaWO4:Dy3+, Eu3+ White Light-Emitting Phosphors
BaWO4:Dy3+,Eu3+ 백색광 형광체의 발광 특성과 에너지 전달 효율

조신호
[Shinho Cho*]

신라대학교 신소재공학과
Department of Materials Science and Engineering, Silla University, Busan 46958, Korea

한국표면공학회지, Vol. 54, No. 3, pp. 112-118.

DOI : 10.5695/JKISE.2021.54.3.112

Influence of Ag Interlayer on the Optical and Electrical Properties of SnO2 Thin Films
Ag 중간층이 SnO2 박막의 광학적, 전기적 특성에 미치는 영향

장진규a, 김현진a, 최재욱a, 이연학a, 허성보b, 김유성c, 공영민a*, 김대일a*
[Jin-Kyu Janga, Hyun-Jin Kima, Jae-Wook Choia, Yeon-Hak Leea, Sung-Bo Heob, Yu-Sung Kimc, Young-Min Konga*, Daeil Kima*]

a울산대학교 첨단소재공학부 b한국생산기술연구원 동남본부 에너지소재부품연구그룹 c한국생산기술연구원 울산본부 첨단정형공정그룹
aSchool of Materials Science and Engineering, University of Ulsan, Ulsan 44776, Korea bKorea Institute of Industrial Technology, Yangsan 50635, Korea cKorea Institute of Industrial Technology, Ulsan 44413, Korea

한국표면공학회지, Vol. 54, No. 3, pp. 119-123.

DOI : 10.5695/JKISE.2021.54.3.119

Graphene Growth on the Cobalt and Nickel Sputtered Cu foil Depending on the Annealing Time
코발트와 니켈이 스퍼터링된 구리 포일에서 어닐링 시간에 따른 그래핀 성장

오예찬, 이우진, 김상호*
[Ye-Chan Oh, Woo-Jin Lee, Sang-Ho Kim*]

한국기술교육대학교 에너지신소재화학공학부
School of Energy, Materials & Chemical Engineering Korea University of Technology and Education, Cheonan City, Chungnam, Republic of Korea

한국표면공학회지, Vol. 54, No. 3, pp. 124-132.

DOI : 10.5695/JKISE.2021.54.3.124

Effect of Negative Substrate Bias Voltage on the Microstructure and Mechanical Properties of Nanostructured Ti–Al–N–O Coatings Prepared by Cathodic Arc Evaporation

[Sungbo Heo, Wang Ryeol Kim and In-Wook Park* ]

Korea Institute of Industrial Technology (KITECH), Yangsan 50623, Republic of Korea

한국표면공학회지, Vol. 54, No. 3, pp. 133-138.

DOI : 10.5695/JKISE.2021.54.3.133

Influence of Deposition Temperature on the Film Growth Behavior and Mechanical Properties of Chromium Aluminum Nitride Coatings Prepared by Cathodic Arc Evaporation Technique

[Sungbo Heo and Wang Ryeol Kim* ]

Korea Institute of Industrial Technology (KITECH), Yangsan 50623, Republic of Korea

한국표면공학회지, Vol. 54, No. 3, pp. 139-143.

DOI : 10.5695/JKISE.2021.54.3.139

Preparation and Antibacterial Properties of the Planar-Type ZnO Powder Coated with Ag or CuO
Ag 또는 CuO를 코팅한 평판형 ZnO 분말의 합성 및 항균성 평가

홍다희a, 곽지유a, 전덕성a, 조동현b, 이건섭b, 이정환b, 이희철a,*
[Da-Hee Honga, Ji-Yoo Gwacka, Deock-Seong Jeona, Dong-Hyeon Job, Gun-Sub Leeb, Jung-Hwan Leeb and Hee-Chul Leea,*]

a한국산업기술대학교 신소재공학과, b(주)덕진 에너지사업부 연구소
aDepartment of advanced Materials Engineering, Korea Polytechnic University, Siheung 15073, Korea bEnergy Business Unit, Duckjin Co., Siheung 15078, Korea

한국표면공학회지, Vol. 54, No. 3, pp. 144-151.

DOI : 10.5695/JKISE.2021.54.3.144

Surface observation of Ni(OH)2 nanosheets fabricated by electrodeposition method
전착법에 의해 제작된 Ni(OH)2 나노 시트의 표면 관찰 및 분석

김동연a, 손인준a,*, 최문현b
[Dong Yeon Kima, Injoon Sona,*, Mun-Hyun Choib]

a경북대학교 금속신소재공학전공, b동강테크
aDepartment of Materials Science and Metallurgical Engineering, Kyungpook National University, 41566, Daegu, Republic of Korea bDongkang Tech Corp.,41497, Daegu, Republic of Korea

한국표면공학회지, Vol. 54, No. 3, pp. 152-157.

DOI : 10.5695/JKISE.2021.54.3.152

Introduction of Selective Electrochemical Additive Manufacturing Technology and Consideration of Integration Method for PCB Mass Production Process
선택적 전기화학 3D 프린터 기술 소개 및 PCB 양산공정 적용방식 고찰

김성빈1,*, 유봉영2
[Sung-Bin Kim1,* and Bongyoung Yoo2]

1애니캐스팅, 2한양대학교 재료화학공학과
1AnyCasting Co., Ltd., B-16th FL., Woolim BLDG., 583 Yangcheon-ro, Gangseo-gu, Seoul, Korea 07547 2Dept. of Materials science and chemical engineering, Hanyang University, 55 Hanyangdaehak-ro, Sangnok-gu, Ansan-si, Gyeonggi-do, Korea 15588

한국표면공학회지, Vol. 54, No. 3, pp. 158-163.

DOI : 10.5695/JKISE.2021.54.3.158

Suppressing Effect of Hydrogen Evolution by Oxygen Functional Groups on CNT/ Graphite Felt Electrode for Vanadium Redox Flow Battery
탄소나노튜브/흑연펠트 전극의 산소작용기를 활용한 바나듐 레독스 흐름 전지의 수소발생 억제 효과

김민성1, 고민성1,2*
[Minseong Kim1, Minseong Ko1,2*]

1부경대학교 마린융합디자인공학과, 2부경대학교 금속공학과
1 Department of Marine design Convergence Engineering, Pukyong National University, Busan 48547, Republic of Korea 2 Department of Metallurgical Engineering, Pukyong National University, Busan 48547, Republic of Korea

한국표면공학회지, Vol. 54, No. 4, pp. 164-170.

DOI : 10.5695/JKISE.2021.54.4.164

Surface hardness measurement of NiP-plated AA7050

[Sungmo Moon1,2,*, Juseok Kim1,3]

1Surface Technology Division, Korea Institute of Materials Science, Gyeongnam 51508, Republic of Korea 2Advanced Materials Engineering, Korea University of Science and Technology, Daejeon 34113, Republic of Korea 3Department of Materials Science and Engineering, Pusan National University, Busan 46241, Republic of Korea

한국표면공학회지, Vol. 54, No. 4, pp. 171-177.

DOI : 10.5695/JKISE.2021.54.4.171

Dielectric Properties of BaTiO3 Substituted with Donor Dopants of Nb5+ and Ta5+

[Yeon Jung Kim*]

College of Engineering, Dankook University, Yongin 16890, Korea

한국표면공학회지, Vol. 54, No. 4, pp. 178-183.

DOI : 10.5695/JKISE.2021.54.4.178

Effect of pre-treatment of AZ91 Mg alloy in HF solution on PEO film formation behavior
AZ91 마그네슘 합금의 PEO 피막 형성거동에 미치는 HF전처리의 영향

권두영1,2,, 송풍근2 , 문성모1,3*
[Duyoung Kwon1,2,, Pung-Keun Song2, Sungmo Moon1,3* ]

1한국재료연구소 표면재료연구본부 2부산대학교 재료공학부 3과학기술연합대학원대학교 신소재공학과
1Surface Materials Division, Korea Institute of Materials Science, Republic of Korea 2Department of Materials Science and Engineering, Pusan National University, Republic of Korea 3Advanced Materials Engineering, Korea University of Science and Technology, Republic of Korea

한국표면공학회지, Vol. 54, No. 4, pp. 184-193.

DOI : 10.5695/JKISE.2021.54.4.184

A study on the Corrosion Detection Sensor using Multi-Wall Carbon Nanotube
다중벽 탄소나노튜브를 이용한 철근 부식 검출 센서 제작 연구

박수빈a, 김성연a, 이수정a, 최문정a, 홍영준a, 권성준b, 유봉영a, *, 윤상화a, *
[Soobin Parka, Sungyeon Kima, Munjeong Choia, Yeongjun Honga, Sujeong Leea, Sungjun Kwonb, Bongyoung Yooa, *, and Sanghwa Yoona, *]

a한양대학교 재료화학공학과, b한남대학교 토목환경공학과
a Department of Materials Science and Chemical Engineering, Hanyang University, Ansan 15588, Republic of Korea b Department of Civil and Environmental Engineering, Hannam University, Daejeon, 34430, Republic of Korea

한국표면공학회지, Vol. 54, No. 4, pp. 194-199.

DOI : 10.5695/JKISE.2021.54.4.194

Lateral growth of PEO films on Al7050 alloy in 0.1 M NaAlO2

[Sungmo Moon1,2,*, Gi Yeob Kim3]

1Surface Materials Division, Korea Institute of Materials Science, Gyeongnam 51508, Republic of Korea 2Advanced Materials Engineering, Korea University of Science and Technology, Daejeon 34113, Republic of Korea 3 Dept. of applied advanced materials, Changwon Campus of Korea Polytechnic, Gyeongnam 51518, Republic of Korea

한국표면공학회지, Vol. 54, No. 4, pp. 200-208.

DOI : 10.5695/JKISE.2021.54.4.200

A Study on the Pretreatment of the Spent Coffee Grounds using Electrocoagulation and Its Filter Characteristics
전기 응고법을 이용한 커피박의 전처리 및 기능성 필터 특성 연구

박수빈a, 한하늘a, 박하늘a, 임승현a, 유봉영a,*, 윤상화a,*
[Soobin Parka, Haneul Hana, Haneul Parka, Seunghyun Lima, Bongyoung Yooa,*, and Sanghwa Yoona,*]

a한양대학교 재료화학공학과
aDepartment of Materials Science and Chemical Engineering, Hanyang University, Ansan 15588, Republic of Korea

한국표면공학회지, Vol. 54, No. 4, pp. 209-214.

DOI : 10.5695/JKISE.2021.54.4.209

FE-SEM Image Analysis of Junction Interface of Cu Direct Bonding for Semiconductor 3D Chip Stacking

[Jaeduk Byun, June Won Hyun*]

Department of Physics, Dankook University, Dandae-ro, Dongnam-gu, Cheonan-si, Chungnam, 31116, Korea

한국표면공학회지, Vol. 54, No. 5, pp. 207-212.

DOI : 10.5695/JKISE.2021.54.5.207

Study on the Fabrication of Various AAO Membranesfor the Application of Li-ion Battery Separator
다양한 형태의 AAO membrane 제조 및 리튬이온 전지의 분리막 응용 연구

김문수†, 임경민†, 하재윤, 김용태*, 최진섭*
[Moonsu Kim†, Kyungmin Lim†, Jaeyun Ha, Yong-Tae Kim*, Jinsub Choi*]

인하대학교 화학공학과
Department of Chemistry and Chemical Engineering, Inha University 22212, 100 Inha-ro, Michuhol-gu, Incheon, Korea

한국표면공학회지, Vol. 54, No. 5, pp. 213-221.

DOI : 10.5695/JKISE.2021.54.5.213

De-icing of the hydrophobic treated nanoporous anodic aluminum oxide layer
소수성 처리된 나노다공성 알루미늄 양극산화피막의 제빙

신예지 1, 김진휘 1, 신동민 1, 문형석 2, 이정훈 1*
[Yeji Shin1, Jinhui Kim1, Dongmin Shin1, Hyung-Seok Moon2, Junghoon Lee1* ]

1 부경대학교 금속공학과, 2 한국생산기술연구원
1Department of Metallurgical Engineering, Pukyong National University, Busan, Republic of Korea 2Energy Plant Group, Korea Institute of Industrial Technology, Busan, Republic of Korea

한국표면공학회지, Vol. 54, No. 5, pp. 222-229.

DOI : 10.5695/JKISE.2021.54.5.222

A Study on Microstructure and Tribological Behavior of Superhard Ti–Al–Si–N Nanocomposite Coatings
초고경도 Ti–Al–Si–N 나노복합체 코팅막의 미세구조 및 트라이볼로지 거동에 관한 연구

허성보, 김왕렬*
[Sung-Bo Heo, Wang Ryeol Kim*]

한국생산기술연구원 첨단하이브리드생산기술센터
Advanced Hybrid Production Technology Center, Korea Institute of Industrial Technology, Yangsan 50635, Republic of Korea

한국표면공학회지, Vol. 54, No. 5, pp. 230-237.

DOI : 10.5695/JKISE.2021.54.5.230

A study on corrosion resistance and surface properties of AZ31 alloy according to Ca-GP addition during PEO treatment
PEO 처리시 Ca-GP첨가에 따른 AZ31합금의 내식성 및 표면특성에 관한 연구

이준수a, 박제신a,b,*, 박일송a,b,*
[Jun-Su Leea, Je-Shin Parka,b,*, Il-Song Parka,b,*]

a전북대학교 금속공학과, b전북대학교 신소재공학부 및 신소재개발연구센터
aDepartment of Metallurgical Engineering, Jeonbuk National University, Jeonju 54896, Republic of Korea bDivision of Advanced Materials Engineering and Research Center for Advanced Materials Development, Jeonbuk National University, Jeonju 54896, Republic of Korea

한국표면공학회지, Vol. 54, No. 5, pp. 238-247.

DOI : 10.5695/JKISE.2021.54.5.238

Effects of post weld heat treatment conditions on localized corrosion resistance of super duplex stainless steel tube used for thermal power plant applications
화력발전용 슈퍼 듀플렉스 스테인리스 강 조관재의 용접 후 열처리 조건이 국부부식 저항성에 미치는 영향

이준호a, 박진성a, 조동민a, 홍승갑b, 김성진a,*
[Jun Ho Leea, Jin sung Parka, Dong Min Choa, Seung Gab Hongb and Sung Jin Kim a,*]

a순천대학교 신소재공학과, b포스코 기술연구원
a Department of Advanced Materials Engineering, Suncheon National University, Jungang-ro, Suncheon 57922, Republic of Korea b POSCO Technical Research Laboratories, Pohang 790-704, Republic of Korea

한국표면공학회지, Vol. 54, No. 5, pp. 248-259.

DOI : 10.5695/JKISE.2021.54.5.248

Synthesis and Characterization of Zinc Oxide Nanorods for Nitrogen Dioxide Gas Detection

[Jong-Hyun Park, Hyojin Kim*]

Department of Materials Science and Engineering, Chungnam National University, Daejeon 34134, Republic of Korea

한국표면공학회지, Vol. 54, No. 5, pp. 260-266.

DOI : 10.5695/JKISE.2021.54.5.260

Formation of compound layers and Wear behavior of AISI4115 steels by gaseous nitriding process
AISI4115 기계구조용 합금강의 질화 가스분위기에 따른 화합물층의 형성 및 내마모특성

김태환1,3, 손석원1,3, 조균택2, 이기안3, 이원범1*
[Taehwan Kim1,3, Seokwon Son1,3, Kyuntaek Cho2, Kee-ahn Lee3, Won-beom Lee1,*]

1한국생산기술연구원 뿌리기술연구소 친환경표면처리연구부문 2한국생산기술연구원 서남본부 동력소재부품연구그룹 3인하대학교 신소재공학과
1Eco-Friendly Thermal Surface Treatment R&D Group, Korea Institute of Industrial Technology(KITECH), Siheung, 15014, korea 2Power materials R&D Group, Korea Institute of Industrial Technology(KITECH), Suncheon, 58022, korea 3Department of Materials Science and Engineering, Inha University, Incheon 22212, Korea

한국표면공학회지, Vol. 54, No. 5, pp. 267-277.

DOI : 10.5695/JKISE.2021.54.5.267

Corrosion Image Monitoring of steel plate by using k-means clustering
k-means 클러스터링을 이용한 강판의 부식 이미지 모니터링

김범수a, 권재성a, 최성웅a, 노정필b, 이경황c, 양정현a*
[Beomsoo Kima, Jaesung Kwona, Sungwoong Choia, Jungpil Nohb, Kyunghwang Leec, Jeonghyeon Yanga*]

a경상국립대학교 기계시스템공학과, b경상국립대학교 에너지기계공학과, c포스코 철강솔루션연구소
aDepartment of Mechanical System Engineering, Gyeongsang National University, Tongyeong, Gyeongnam, 53064, Korea bDepartment of Energy Mechanical Engineering, Gyeongsang National University, Tongyeong, Gyeongnam, 53064, Korea cSteel Solution R&D Center, POSCO, Inchen, 21985, Korea

한국표면공학회지, Vol. 54, No. 5, pp. 278-284.

DOI : 10.5695/JKISE.2021.54.5.278

Characteristics of TiAlCrSiN coating to improve mold life for high temperature liquid molding
고온 액상 성형용 금형 수명 향상을 위한 TiAlCrSiN 코팅의 특성

여기호a, 박은수b, 이한찬b,*
[Ki-Ho Yeoa, Eun-Soo Parkb, Han-Chan Leeb,*]

a한양대학교 금속재료공학과, b(주)이엠엘 R&D 센터
aDepartment of Metallurgical and Materials Engineering, Hanyang University, 15588, Republic of Korea bR&D Center, Eloi MaterialL(EML), Suwon 16229, Republic of Korea

한국표면공학회지, Vol. 54, No. 5, pp. 285-293.

DOI : 10.5695/JKISE.2021.54.5.285

Prospects on the Use of Corrosion Rate Measurement Method for Stainless Steel
스테인리스 강의 부식 측정방법의 이용과 전망

최용선, 이재원, 박은옥, 이기영*
[Yongseon Choi, Jaewon Lee, Eunoak Park, Kiyoung Lee*]

인하대학교 화학 화학공학융합학과
Department of Chemistry and Chemical Engineering, Inha University, Incheon 22212, Korea

한국표면공학회지, Vol. 54, No. 6, pp. 294-301.

DOI : 10.5695/JKISE.2021.54.6.294

The Effect of electron beam surface irradiation on the properties of SnO2/Ag/SnO2 thin films
전자빔 표면 조사에 따른 SnO2/Ag/SnO2 박막의 특성 연구

장진규a,†, 김현진a, 최재욱a, 이연학a, 공영민a, 허성보b, 김유성c,†, 김대일a,*
[Jin-Kyu Janga,†, Hyun-Jin Kima, Jae-Wook Choia, Yeon-Hak Leea, Young-Min Konga, Sung-Bo Heob, Yu-Sung Kimc,†, Daeil Kima,*]

a 울산대학교 첨단소재공학부 b 한국생산기술연구원 동남본부 첨단하이브리드생산기술센터 c 한국생산기술연구원 울산본부 첨단정형공정그룹
a School of Materials Science and Engineering, University of Ulsan, Ulsan 44776, Korea b Korea Institute of Industrial Technology, Yangsan 50635, Korea c Korea Institute of Industrial Technology, Ulsan 44413, Korea

한국표면공학회지, Vol. 54, No. 6, pp. 302-306.

DOI : 10.5695/JKISE.2021.54.6.302

Improved Adhesion of DLC Films by using a Nitriding Layer on AISI H13 Substrate

[Min-Seok Park1,2, Dae-Young Kim1,2, Chang-Seouk Shin3, Wang Ryeol Kim4,*]

1Ness Co, Busan, Republic of Korea 2Mechanical Engineering, Pukyong National University, Busan, Republic of Korea 3School of Mechanical Engineering, Pusan National University, Busan, Republic of Korea 4Dongnam Division, Korea Institute of Industrial Technology, Yangsan, Republic of Korea

한국표면공학회지, Vol. 54, No. 6, pp. 307-314.

DOI : 10.5695/JKISE.2021.54.6.307

Effect of Ultrasonic Process of Electroless Ni-P-Al2O3 Composite Coatings

[Jin-Doo Yoon1, Bon-Heun Koo1, Hwan-Il Hwang2, Sun-Kyo Seo3 and Jong-Kyu Park3* ]

1 School of Materials Science & Engineering, Changwon National University Changwon, 20 Changwondaehak-ro, Uichang-gu, Changwon-si, Gyeongsangnam-do, 51140, Korea 2Dept. of Smart Surface Procession, Namincheon Campus of KOREA POLYTECHNIC, Yeomjeon-ro 333 beon-gil, Michuhol-gu, Incheon, 22121, Korea 3SBP Surtech, B, 214 410 Jeongseojin-ro, Seo-gu, Incheon, 22689, Korea

한국표면공학회지, Vol. 54, No. 6, pp. 315-323.

DOI : 10.5695/JKISE.2021.54.6.315

Evaluating the performance and characteristics of Rutile TiO2 thin film for Triboelectric Nanogenerator (TENG)
Triboelectric Nanogenerator (TENG)를 위한 Rutile TiO2 박막 성능 및 특성 평가

문지현a, ∇, 김한재a, ∇, 김효배a, *, 안지훈a, *
[Ji-Hyeon Moon a, ∇, Han-Jae Kim a, ∇, Hyo-Bae Kim a, *, Ji-Hoon Ahn a, *]

a한양대학교 ERICA 재료화학공학과
aDepartment of Materials Science and Chemical Engineering, Hanyang university, 55 Hanyangdaehak-ro, Sangnok-gu, Ansan 15588, Gyeonggi-do, Republic of Korea

한국표면공학회지, Vol. 54, No. 6, pp. 324-330.

DOI : 10.5695/JKISE.2021.54.6.324

Fabrication and Characterization of Ytterbium Silicates for Environmental Barrier Coating Applications
환경차폐코팅용 이터븀 실리케이트의 제조와 물성평가

최재형a, 김성원a,*
[Jae-Hyeong Choia, and Seongwon Kima,*]

a한국세라믹기술원 이천분원 엔지니어링세라믹센터
aEngineering Ceramics Center, Korea Institute of Ceramic Engineering and Technology, Icheon, Gyeonggi-do 17303, Korea

한국표면공학회지, Vol. 54, No. 6, pp. 331-339.

DOI : 10.5695/JKISE.2021.54.6.331

Synthesis of size-controlled ZnO tetrapods sizes using atmospheric microwave plasma system and evaluation of its photocatalytic property
대기압 마이크로웨이브 플라즈마를 이용한 다양한 크기의 ZnO tetrapod 합성 및 광촉매 특성 평가

허성규, 정구환*
[Sung-Gyu Heo and Goo-Hwan Jeong*]

강원대학교 대학원 신소재공학과
Department of Advanced Materials Science and Engineering, Graduate School of Kangwon National University, Chuncheon 24341, Republic of Korea

한국표면공학회지, Vol. 54, No. 6, pp. 340-347.

DOI : 10.5695/JKISE.2021.54.6.340

A Study on Nitrogen Doping of Graphene Based on Optical Diagnosis of Horizontal Inductively Coupled Plasma
수평형 유도결합 플라즈마를 이용한 그래핀의 질소 도핑에 대한 연구

조성일, 정구환*
[Sung-Il Jo and Goo-Hwan Jeong*]

강원대학교 대학원 신소재공학과
Department of Advanced Materials Science and Engineering, Graduate School of Kangwon National University, Chuncheon 24341, Republic of Korea

한국표면공학회지, Vol. 54, No. 6, pp. 348-356.

DOI : 10.5695/JKISE.2021.54.6.348

Effect of fluorine gas addition for improvement of surface wear property of DLC thin film deposited by using PECVD
PECVD를 이용한 DLC 박막의 표면 마모 특성 향상을 위한 플루오린 첨가의 영향

박현준ab, 김준형c, 문경일a*
[Hyun-Jun Parkab, Jun-Hyung Kimc, Kyoung-Il Moona,*]

a한국생산기술연구원, b인하대학교 신소재공학과, c㈜풍산
aHeat Treatment R&D Group, Korea Institute of Industrial Technology, Gyeounggi-do 150014, Korea bDepartment of Materials Science and Engineering, Inha University, Incheon 22212, Korea cPoongsan Co., Ltd.,

한국표면공학회지, Vol. 54, No. 6, pp. 357-364.

DOI : 10.5695/JKISE.2021.54.6.357

Influence of Plasma Corrosion Resistance of Y2O3 Coated Parts by Cleaning Process
세정공정에 따른 Y2O3 코팅부품의 내플라즈마성 영향

김민중a,b, 신재수c, 윤주영b,d,*
[Minjoong Kima,b, Jae-Soo Shinc, Ju-Young Yunb,d,*]

a한양대학교 전기공학과, b한국표준과학연구원 진공소재측정팀 c대전대학교 에너지신소재공학과, d과학기술연합대학원대학교 NT-IT 융합
aDepartment of Electrical Engineering, Hanyang University, Seoul, 04763, Republic of Korea bVacuum Materials Measurement Team, Korea Research Institute of Standards and Science, Daejeon, 34113, Republic of Korea cDepartment of Energy&Advanced Materials Engineering, Daejeon University, Daejeon, 34520, Republic of Korea dDivision of Nano&Information Technology, University of Science and Technology, Seoul, 34113, Republic of Korea

한국표면공학회지, Vol. 54, No. 6, pp. 365-370.

DOI : 10.5695/JKISE.2021.54.6.365

Study on Evaluation of Degrease Performance on the Interface between Oil and Alloy
탈지 정도에 대한 방청유-금속 계면의 영향성 평가

최원영1, †, 김문수1, †, 유현석2, 송연균2, 정용균2, 최진섭1,*
[Wonyoung Choi1, † , Moonsu Kim1, †, Hyeonseok Yoo2, Yeongyun Song2, Yong-Gyun Jeong2, Jinsub Choi1, *]

1: 인하대학교 화학공학과; 2: 포스코 철강솔루션연구소
1: Department of Chemistry and Chemical Engineering, Inha University 22212, 100 Inha-ro, Michuhol-gu, Incheon, South Korea 2: Steel Solution Research Lab., POSCO 21985, 100 Songdogwahak-ro, Yeonsu-gu, Incheon, South Korea

한국표면공학회지, Vol. 54, No. 6, pp. 371-379.

DOI : 10.5695/JKISE.2021.54.6.371